CONSISTING OF:

1. Heavy Duty Hydraulic Cattle Crush
2. Heavy Duty Hydraulic Weigh Crate
3. Hydraulic Draft Section
4. Hydraulic Power Unit
5. Control Panel, Hose Kit, Hydraulic Fittings & Test Run

Descriptions, then Picture follows below.

Rustler Hydraulic

Option 1

• Full vet section
• Split hydraulic rear sliding door
• Facility to hang needling equipment
• Needling facility, access near and offside
• Extra heavy duty construction box frame
• Hydraulic operated squeeze with two drop gates
• Dehorning and drenching made easy due no obstruction at front of headbail
• Hydraulic headbail fitted with 150mm wide neck rubbers and 75mm shoulder pad rubbers

Option 2

• Crush as above with a single hydraulic back door instead of split

See also Compact Crush

Option 3

• Crush as option 1 above, but with no vet section.

Option 4

• Compact with a single hydraulic back door instead of split

Heavy Duty Weigh Crate

Option 1

• Scale mounting lugs
• Heavy duty construction
• Full access gate on offside
• Hydraulic operated rear slide door
• Fully pressed 3mm thick fully welded sheeting
• Heavy 5mm checker plate steel floor with foot slats

Option 2

• Split door

Option 3

• Doors both front and rear for better weighing accuracy

Draft Section

• Heavy duty construction
• Hydraulic operated draft gates
• Rubber stops on gates to reduce noise
• Heavy 5mm checker plate steel floor with foot slats
• Manual operated slat gate between man and draft gates

• Oil Level Gauge
• Filler breather filling cap
• Adjustable pressure relief valve
• 5.5KW, 4-pole, 3-phase electric motor.
• Hydraulic pump submerged in oil tank
• Tank capacity approximately 100 litres
• Hydraulic gear pump, GroupIII, supplying 44cc of oil per revolution
• Unit pretested
• Electrics not included

• Two spool 300gpm hydraulic valve
• Control panel mounted approximately 3 metres
• Hydraulic hose and mounting, coupling control panel to crush
• Fully tested at factory