HOMEHORTICULTURAL PRODUCTSCATTLE PRODUCTSWhat's NEWFurther ENQUIRIESMAILING LIST

TOTAL SOLUTION 10 BIN
SELF PROPELLED LETTUCE HARVESTER

Just what the lettuce grower has been waiting for...

Paddock to Market - this is the machine that makes it easy.
Cut, pack-n-stack ten pallets before you unload onto a truck!


Deluxe Self Propelled Lettuce harvester
Safety and convenience make this unit the one for you.

 
  • self propelled
  • hydrostatic drive
  • speed 50m per hour to 12km per hour
  • constant 6 wheel drive
  • power steering
  • 90HP, 4 cyl Perkins Diesel motor
  • motor rear mounted
  • load 5 pallets on each side
  • two packing stations
  • finger tip speed control and emergency stop at packing station
  • emergency stop button fitted at the front of the machine
  • top shade roof made from P.V.C. tarp material
  • from the tractor cab both side elevators and lift elevators can be hydraulically folded to the transport position
  • lift elevator travels up the front of machine and along the full length of the body.  Reject Lettuce fall off the back
  • special design lift elevator made from nylon chain with rubber coated stainless steel links joining chain together making chain 600mm wide.  Lifting flights 75mm high at 500mm centres take lettuce up to be packed
  • Lettuce is cut and trimmed, placed on the two side elevators and distributes them onto lift elevator
  • variable speed on all belts · picking speed can be manual set at control cab or remote control at packing stations
  • approximate floor area 7.2m x 3m
 
Step one
Pickers place lettuce on conveyer, which moves letuce to centre
step two
Lettuces travel up to the packing area
step three
Once at the top, they lettuces move right along the centre of the vehicle as the packers select and pack.  The pallets are right next to the packers for quick access.
step four
Unwanted lettuce simply drops out the back onto the paddock.
step five - go home!

Job's done: time to go already!.

Right from the cab, both side elevators and lift elevators are hydraulically folded to the transport position


Ask here
about how it can help you,
and about modifications available for your application..


PREVIOUS NEXT

[ HOME PAGE ] [WHAT'S NEW ]
[ HORTICULTURAL PRODUCTS ] [ FURTHER ENQUIRIES ]
[ CATTLE PRODUCTS ] [ MAILING LIST ]
Stark Engineering
& Hardware Pty Ltd
sales@starkeng.com.au
Phone: (07) 5465 4195
[or Int+ 61 7 5465 4195]
Fax: (07) 5465 4190
[or Int+ 61 7 5465 4190]
Laidley Road
Forest Hill Q 4342
Australia
© 1998-2003 Stark Engineering and Hardware Pty Ltd
TOP of PAGE

Site Designed and Built by
Locknet Internet Solutions